XTool F1 / F2 ULTRA / S1 / IF2 / AP2 Shut Off Gate
XTool F1 / F2 ULTRA / S1 / IF2 / AP2 Shut Off Gate
XTool F1 / F2 ULTRA / S1 / IF2 / AP2 Shut Off Gate
XTool F1 / F2 ULTRA / S1 / IF2 / AP2 Shut Off Gate
XTool F1 / F2 ULTRA / S1 / IF2 / AP2 Shut Off Gate

Embrace Making

XTool F1 / F2 ULTRA / S1 / IF2 / AP2 Shut Off Gate

$25.00
Quantity:

Compatible with the following machines:

  • xTool F1 Ultra
  • xTool F2 Ultra MOPA
  • xTool F2 Ultra UV

This adapter allows you to control the airflow through a single xTool black hose connection. It has one male and one female end. Therefore one end can be connected to another fitting or directly to the port on the back of your machine. The other end connects to the black xTool hose. This is not a hose splice. It cannot be placed between two black xTool hoses. If you are looking for a hose splice, click here.

Build your custom smoke and fume extraction system with hose adapters allowing you to transition between various size hoses, control airflow, or split your connections.

Perhaps you have several machines requiring fume extraction and you would like to utilize one vacuum or fan source. You can split your connection with the xTool black hose splitter and then control the airflow through your various channels using these shut off gates.

This shut off gate has two positions (open/close) and the gate snaps into each position. It is held firmly into each position so it will not move with the vacuum source and the gate can be positioned in any orientation as gravity will not close or open the gate.

The black xTool hose with it's glossy end fitting press fits directly onto one side (male side) of these gates. The female side of the gate will fit directly onto other adapters from Embrace Making such as the hose splitter, or can be fit directly onto the back of machines such as the F1/F2 Ultra, S1 or filter and fan products like the xTool AP2 and IF2. Essentially the female end of the gate is the same geometry as the black xTool hose.

With these gates I would highly recommend the xTool Inline Fan 2 (IF2) if you can route the exhaust outside. Check the link below for the best price from xTool. If you wish to run 4 inch hose on the outlet of the xTool Inline Fan 2, then you can use one of my AP2/IF2 to 4 inch hose adapters to achieve that.

 What is included:

  • QTY: 1 Shut Off Gate

As an Amazon Associate I earn from qualifying purchases (at no extra cost to you). Related items you might find useful: