Eliminate the resin ink odor from your workspace with an exhaust hose adapter that replaces the small air filter on the front of the EufyMake E1. It can be flipped 180 degrees to exit left or right side and the hose outlet can be adapted to a variety of sizes of hoses. See video below for installation instructions.
The eufyMake E1 is a versatile UV ink printer that can print on almost any material. However, the UV ink used does emit an odor that may irritate some people when working in a confined space. We have devised an exhaust hose adapter to fit in the location of the original air filter. This allows you to connect a hose and actively filter or evacuate the resin smell rather than use the passive air filter that comes with the machine.
Although the EufyMake E1 comes with an air filter there does not appear to be any fans or method of actively drawing air through the filter. Therefore the passive nature of the filter makes it less than ideal.
Actively pulling the fumes and odors from the printer is the best solution and the outlet port on this adapter is intended to fit the black flexible exhaust hose from xTool that is included with the xTool Air Purifier 2. The xTool Air Purifier 2 is one of the best air purifiers on the market right now and connecting it to your EufyMake E1 will certainly eliminate all odors.
The hose adapter can be rotated 180 degrees to exit either the left or right hand side of the machine.
However, you are not limited to connecting only the xTool AP2 and black xTool hose.
You can use the following parts that will fit onto the end of the EufyMake E1 Hose Adapter and allow you to transition to other hoses and hose sizes. Click on the links to find the products.
-
Adapter to common 4 inch duct hose.
- Then use 4inch inline duct fan to pull air out door or window
-
Adapter to ~2.5 inch white xTool hose
- Use with smaller and cheaper xTool desktop air purifier
Therefore you have maximum flexibility in building and customizing a fume extraction system that fits your needs and your budget.
Included in the kt is an additional hose support bracket that can be used to lift flexible hoses away from the front door of the machine to prevent interference. It can be adhered to the side of the E1 using double sided tape.
Note that the part you receive will be BLACK.
What is included:
- 1x Exhaust Hose Adapter
- 1x Hose Support Bracket
What is not included:
- Hoses, Air Purifiers, Fans, etc. see below for some ideas.
Looking for more? As an Amazon Associate I may earn from qualifying purchases (at no extra cost to you). he listing photos.
- eufyMake E1
- XTOOL Air Purifier 2
- XTOOL Inline Fan 2
- XTOOL 6 inch Inline Duct Fan (with 4inch adapter)
- 190 CFM 4 inch Fan With Speed Controller
- 195 CFM 4 inch Fan With Speed Controller
- 4" Flexible Hose
Need materials? See below
- 40oz TUMBLERS WITH HANDLE
- TALL STAINLESS STEEL TUMBLERS
- 12oz MUG WITH HANDLE
- 12oz TUMBLER WITH STRAW
-
20oz TUMBLER WITH STRAW
- 3" Black Acrylic Round Ornaments
- 3" White Acrylic Round Ornaments
- 3" White Acrylic Hexagon Ornaments
- 3" Clear Acrylic Round Ornaments
- 3" Clear Acrylic Hexagon Ornaments
- 3" Gold Mirror Acrylic Hexagon Ornaments
- 3" Silver Mirror Acrylic Round Ornaments
- 4" Clear Acrylic Round Ornaments
- 4" Black Acrylic Round Ornaments
Canada
